Greetings:
I have 3 sites with 3550s connected that I am trying to connect via dot1q trunks thru a metro ethernet setup.
Each 3550 is connected to a LE-311 which is connected to a LE-427 at the CO.
There is very little information on these wwp switches that I can find on the internet.
The 3550s ports that connect to the LE's are configured as:
int GI0/x switchport trunk encapsulation dot1q switchport mode trunk
How should these ports on the LE-311's be configured by my provider?
I will try to provide more info if needed.
Keith