General Cisco shaping problem

We seem to have a lot of trouble with Cisco boxes and shaping.

We have Cisco Catalyst 3550 24 port and SMI image. The configuration is as follows.

class-map IP match ip dscp 0

policy-map 1Meg class IP police 1000000 9600 exceed-action drop

interface Fa0/1 service-policy input 1Meg service-policy output 1Meg

The same configuration on on one of our Cisco 7604 boxes with sup32

The problem is that the shaping is done inaccurately. To get accurate shaping we have to double the policier rate. Is there a problem with our configurations or is Ciscos traffic-shaping truly bad.

Thanks in advance.

Armin Kask

Reply to
Armin Kask
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.