1. Home
  2. Cisco Systems
  3. Etherchannel Configuration on 3750

Etherchannel Configuration on 3750

I have read through the documentation on

formatting link
am left with some questions regarding our situation and the best approach. We have a VMware ESX server using two bonded GigE ports on a

3750, so there are multiple IPs on the etherchannel. In a routed network where all source packets (from clients) will be coming in from a single ip (the routers interface) which type of load-balancing would be best, I would think dest-ip since that would be the only one that would be different but I am not sure. Also does anyone know whether the algorithm for LACP is better/worse than the one for standard etherchannel? TIA, Steve
Reply to
SteveO
Loading thread data ...

Hi,

I would guess load-balancing based on source/destination ip AND source/destination port would suit you best for such a setup. Don't know if LACP is better tha pagp or the other way around.

Erik

formatting link
but am left with some questions regarding our situation and the best

Reply to
Erik Tamminga

"coming in from a single ip" is not a consequence of routing.

Coming in from a single mac address is.

Maybe you are of course doing NAT.

Reply to
anybody43

Do you mean single MAC address?

Reply to
tcollicutt

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.