1. Home
  2. Cisco Systems
  3. Cisco VPN Client Can't Access LAN

Cisco VPN Client Can't Access LAN

Anyone,

I would like to seek help from this resourceful forum:

I have Cisco router configured using Linux based FreeRadius and have Cisco VPN Client to access to LAN from Internet. The connection works fine, but I cannot access any LAN resources, nor pinging LAN's ips.

The configuration on Router is:

E0 --> 10.10.10.2, cross-over connected with FW port1 of 10.10.10.1 ip local pool xxx 192.168.1.1 192.168.1.100 ip route 0.0.0.0 0.0.0.0 10.10.10.1

On FW port1, all ports open inside/out for testing. Also on FW, routing is set to have 192.168.1.0/24 routing to 10.10.10.1

While CiscoVPN client is connected, I think everything is working well except needing client IP being recognized as LAN's.

Any help is greatly appreciated!

Ste

Reply to
Ste
Loading thread data ...

hard to say without seeing the config... make sure you have nat-t enabled if your internet pc has a firewall on it.

Reply to
garrisb

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.