Hi
How can I tell if IP plus is installed on a Cisco 2610 router running IOS 12.3(15)?
Output of show ver is below -
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(15), RELEASE SOFTWARE (f
c3) Technical Support:
Compiled Tue 24-May-05 14:02 by ssearch
Image text-base: 0x80008098, data-base: 0x81A13050
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-IK9O3S3-M), Version 12.3(15), RELEASE SOFTWARE (fc3)
Router uptime is 9 minutes System returned to ROM by power-on System image file is "flash:c2600-ik9o3s3-mz.123-15.bin"
cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes of memory . Processor board ID JAD054005ZJ (1988650851) M860 processor: part number 0, mask 49 Bridging software. X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s) 1 Serial network interface(s) 32K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read/Write)Configuration register is 0x2102
Thanks Dilan