Check out What People try to do - Whats Wrong with this

At 8:30PM on 07/10/06, we will be making a few changes to the AZ HQ network. Due to the amount of bandwidth we currently use, we are going to upgrade network hardware. I will be unplugging the current Cisco 2600 HQ router and plugging in the Cisco 515E PIX firewall. I will be running the following commands on the PIX firewall:

conf t interface Ethernet0 ip address 216.207.124.226 255.255.255.224

interface Ethernet1 ip address 192.168.0.1 255.255.252.0

Reply to
steve baum
Loading thread data ...

Hmm IOS commands on a PIX.. "at 8:30AM 08/10/06 we will be plugging the

2600 back in and dropping the PIX off the top of our building.."

Flamer.

Reply to
die.spam

Hmm, guess you haven't used Pix 7 code yet?

Reply to
Brian V

Circle gets the square.

Reply to
die.spam

LMAO, good answer!

Reply to
Brian V

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.