Catalyst 2950 VLAN Trunks

I have setup vlan trunking between fortigate firewall and catalyst 2950. On the trunk, I am working with two interfaces. One is physical and the other is vlan 550. Considering that physical interface is native default vlan 1, can this configuration work? If not, why?

The interface definition of 2950 is as follows.

int fa 0/15 switchport mode trunk

int fa 0/2 switchport access vlan 550

int fa 0/4

Thanks in advance

Reply to
RG
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.