I have HyperTerminal on my Windows XP laptop. I am connected to an analog line. On the other side I have a router's AUX interface connected to an analog line (USR Modem)as well.
I would like to use HyperTerminal to place a call over the analog line to the Router. Then the router is only allowed to call back to one or to preset phone numbers. One of those is the one my laptop is connected to at the office. The other is my house phone. Then it calls the number (My Laptop) and hyperterm accepts the call. At that point I am basically in the router using an out of band method.
I am trying to find out how to configure the AUX port to make this procedure work correctly.
Has anyone done this in recent memory that would be willing to share that part of their conifg?
Thanks cisco people..
snipped-for-privacy@hotmail.com