Hello!
We bought WLC-2106 and two AP-1121G.
AP-1121G was with autonomous software, so I downloaded software and switched it to lightweight mode, but it doesn't work. I see in controller log :
*Oct 13 09:43:35.437: %LWAPP-6-DISC_RESPONSE_SENT: spam_lrad.c:1327 Discovery Response sent successfully to AP 00:21:55:74:af:82 *Oct 13 09:43:28.916: %DHCP-6-SCOPE_NOT_FOUND: dhcpd.c:167 Dropping packet from 192.168.22.18 (unable to match to a dhcp scope) *Oct 13 09:43:28.915: %DHCP-6-SCOPE_NOT_FOUND: dhcpd.c:167 Dropping packet from 192.168.22.18 (unable to match to a dhcp scope)Then AP reboots.
192.168.22.18- management interface address.dhcp.conf for AP:
option space ciscoap; option ciscoap.vci code 43 = text; option ciscoap.wcip code 60 = string;
host ap { hardware ethernet 00:21:55:74:af:82; fixed-address 192.168.22.20; option ciscoap.vci "VCI string" ; option ciscoap.wcip C0:A8:16:12; }
So I decided to return AP to autonomous mode. I downloaded image, put it on ftp. AP got it, rebooted, but seems it is still in lightweight mode- I see the same messages on controller log and can't reach AP over http.
Could you tell me how can I return AP to authonomous mode?
Is there any howto for adding AP to wlc2106?
thank you!