Latest threads in General Home Automationshow only best voted threads

Subject Author Posted Replies
 
Hybrid controller
Hi I am looking a way how to control and access (over internet) my home automation system (HAI Omni IIe). I read there are hybrid (hardware/software) controllers. As you probably guessed I don't won't...
3
3
 
trying to set up some old x10 units -- having some problems
Sorry for being vague, I'll try to be brief. We installed some X10 wall modules several years ago and promptly didn't use the system :-). Anyway, we want to get them working now so that we can have...
2
2
 
LukWerks video monitors
Kindly folks, I have been favorably impressed with the theoretical capabilities of the LukWerks video monitoring system, yet I see almost nothing on this newsgroup regarding it - not even in the...
3
3
 
Alarm system that will SMS me?
GE Simon or Concord with an module
9
9
 
Idea for Cheap Alarm System
I'd like to have a simple alarm. It could be as basic as a motion detector that sets off a loud siren. I think that would scare off the majority of intruders. We come in through the garage, so I would...
23
23
 
Vintage Computers
Hi, I moved to a smaller home (the end of last year) and am liquidating most of my collection of working vintage computers and classic game consoles ( I am slow at getting it posted on eBay but you...
 
Result of search for KIT>ELECTRONIC HOBBY KIT
Result of search for KIT>ELECTRONIC HOBBY KIT B N Jagadeesh New TIS Address Database search -------------------------------------------------------------------------------- Company American Science &...
 
Wireless surveillance system
I want to install an outdoor surveillance system around my house. I have yet to decide whether to go wireless or to run cables. Obviously a wireless system would be easier to install, but I'm not sure...
13
13
 
Computer Control over Leviton Green Series Components
Has anyone experience of controlling devices in the Leviton Green series? This home uses wall switches such as dimming wall switch controllers HXC7S-1TW with dimming wall switch receivers HXM06-1TW to...
6
6
 
Momentary contact switch using Insteon?
Can anyone explain how to create a momentary switch behavior using Insteon? Where if the user is physically holding down a button then the lamp is lit, conversely, when the user lets go, the lamp goes...
3
3
 
How to set timers for z-wave devices
Hi Can we create timers [similar to PLC 2414U for both insteon and x10 devices] for z-wave devices. If yes then what will be the commands and/ or procedure for the same.If it is not possible then what...
3
3
 
Occupancy detection
I came across the following article recently and began to wonder about the current state of occupancy detection. Even X-10 at its smartest is pretty dumb when it comes to turning out lights that...
22
22
 
CM11A lockup
Once again, an X-10 "broadcast storm" detector would have been a very useful device to have. I was sitting in my office, surfing and I began hearing random appliance modules going on and off. Every...
12
12
 
I'm loving Insteon
I'm not associated with smarthome, in fact I think their prices are too high but service excellent, but I'm lovin Insteon. I'm a diy'er who over the past 20 years or so used x10 mostly for convenience...
3
3
 
Motion Sensor on 3-Way
I have the following setup: (1) Light fixture at base of basement steps. (2) Switch plate at the top of the steps (3) Switch plate down in the basement area I want that: (1) The light turn on by...
3
3