Latest threads in Cisco Systemsshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
Authenticate Router Not User
I am trying to find a decent example of the above. In brief I would like to authenticate a router in ACS, say by a specified MAC address, or unique router Hostname etc to protect against a user adding...
3
|
13 years ago
|
3 | |
|
|
Ordering WCS
I'm working with a customer that has several WLC in place and working already. They now want to get a WCS server with location services in place. Does the licensing strictly depend on the number of...
2
|
13 years ago
|
2 | |
|
|
can you have Pruning on transparent switches?
######### Can you have Pruning on transparent switches? Complaint: The hosts on SW2 vlan200 aren't passing traffic. My question: Why no vlan200 in the "not pruned" category of sw2? This looks like it...
3
|
13 years ago
|
3 | |
|
|
LMS 3.2 - syslog doesn't work
Hi, Anybody has experience to configure syslog in Cisco Works 3.2 ? I can't do it. Initially I had in "Collector Status" invalid(1720) and received(1720) packets but why invalid? I restarted process...
1
|
13 years ago
|
1 | |
|
|
TFTP
I am running Windows 7 Professional with AVG Anti-virus protection. I have installed the Solarwinds TFTP server. When I use Putty to SSH into my router, I connect and then type 'copy star tftp'. It...
6
|
13 years ago
|
6 | |
|
|
good DHCP server for CISCO hardware
I'm looking for free/commercial DHCP server for Windows 2000 good working with CISCO hardware: APs, switchs, WLCs
5
|
13 years ago
|
5 | |
|
|
Remote VPN on a PIX501
Its been a while and my experience is with ASA's. It appears they are different than the PIX501 with IOS v.6.3. How can I specify a local user database for users logging into the remote VPN? There...
2
|
13 years ago
|
2 | |
|
|
Setting up 1941 with Amazon EC2.
Hello all I don't have much experience with Cisco. My company wants me to setup EC2 with a new 1941 router with the 15.1 IOS i believe is installed on there. The router is configured for internet...
7
|
13 years ago
|
7 | |
|
|
"ip route ... track ..." with Tunnel up/down status?
We have a branch router connected to the head office via two VPN tunnels. One is via ADSL and the other via SDSL. There are two DMVPN tunnels over IPsec. Eigrp is running for the routing. The ADSL has...
2
|
13 years ago
|
2 | |
|
|
Port forwarding on Cisco 1800 series - Help
Can someone help explain how I can forward ports, such as 80, from a public DHCP address, to an Internal LAN address? Because my public IP changes often I'm not sure how I can NAT that to an internal...
14
|
13 years ago
|
14 | |
|
|
Pix as Firewall Endpoint
Hi, I have a Pix501 running version 6.3. I need to configure it as a VPN endpoint. The internet connection is a DSL modem with a dynamic IP and I have the public IP passing through the DSL modem to...
1
|
13 years ago
|
1 | |
|
|
871W: Wi-fi to Wi-fi unreliable
I have a laptop on the wifi. It can connect to internet no problem. It can connect to almost every host on the wired LAN without problem. There is an IPMI destination on the wired LAN which is...
28
|
13 years ago
|
28 | |
|
|
Cisco inbound NAT Question
Having an issue, Trying to interconnect a Extreme networks Blackdiamond 8810 and a 6504 cisco via 10gb fiber. We need to NAT everything from the BD8810 to the 6504... but extreme networks doesnt...
3
|
13 years ago
|
3 | |
|
|
Cisco RV042
I have a Dual WAN, Cisco (LinkSys) RV042. This is an awesome little router for the price, but was wondering if someone can help me understand how the Dual WAN path is selected. The one thing that is...
1
|
13 years ago
|
1 | |
|
|
SNMP v1 and v3 at the same time?
Hi, Is it possible to configure SNMP v1 and v3 on a Cisco router at the same time or only one configuration can be active at a time? Regards, AP
1
|
13 years ago
|
1 |