Wi-Linx access point- further info for redbaron@learn2fly.ca company + drivers

I have a Wi-Linx b PMCIA card and am looking for drivers. any ideas of drivers or chipset ? interestingly enough I went throught the press releases as the website is now a porno link. turns out that it was a proud Winniepg Canada based company. I am in Winnipeg. one name was in the phone book. tuned out non working. Other was a very proud CEO Ed J Balenger. he was hiding in a rural area "Pointe du Bois" When I politely asked him for information this morning all he kept repeating was "I recent this intrusion at my residence" told him it was nice dealing with " such a reputable individual" shaes of Enron.

For more information contact:

snipped-for-privacy@trlabs.ca

Ed J. Belanger President CDS Technologies Phone: 204-947-5626

CURRENT ADDRESS AND PHONE NUMBER: !!!!

Belanger, Ed J POINTE DU BOIS, MB R0E 1N0 ( 204) 884-2407

Thanks to Jeff Leiberman:

You have one of the older >

Wavelan/Orinoco/Lucent/Agere/Avaya/Proxim/Whatever PCMCIA cards that >

uses the Hermes chip. It's a Prism II based system. >

'IMRWLPC24H'> However, the number you supplied is the version with only an external > antenna connector and no built in antenna. This is normally only used > in access points, such as the Apple Airport or Apple client radios. > Are your sure about the FCC ID number? > > The drivers are easy. Anything that will work with the old orinoco > Gold or Silver cards will work with your orphan card. See: >

*&p_li=> I'm not sure if you'll need to update the firmware, but it wouldn't

original message: From: snipped-for-privacy@learn2fly.ca ( snipped-for-privacy@learn2fly.ca) Subject: HELP: Wi-Linx access point This is the only article in this thread View: Original Format Newsgroups: alt.internet.wireless Date: 2004-02-03 23:04:20 PST

Hello,

I am trying to configure a Wi-linx wireless access point. I have no docs on it and non can be found on the web. It is made by CDS Technologies, which appears to no longer exist. I am able to reset it to factory defaults and use it as an access point. The default SSID is "default".

Does anyone have experience with this beast? I will try and get some snapshots of it online. Also if I do get into it, I will post a help file online for others.

Thanks!