Linksys WAP11 hardware versions

Anyone know or know where to find what the hardware and performance differences are between the Linksys WAP11 hardware versions 2.2 vs. 2.6 vs. 2.8?


Reply to
Scott & Gayle
Loading thread data ...

WAP11 versions are all different. I'm doing this from memory plus Google so beware of wrong or incomplete info:

version 1.0 and 1.1 were an Atmel AT76C510 chipset based board. 1.0 sucked big time and would lockup randomly no matter what firmware was used. 1.1 sorta worked better. Has USB configuration port. v1.1 FCCID O7J-GL2411AP

formatting link
'O7JGL2411AP' version 2.2 was based on the Texas Instruments ACX100 chipset. A major improvment. V2.2 is sufficiently similar to the Dlink DWL-900AP+ that the firmware is interchangeable. USB config port removed. v2.2 FCCID O7J-GL2422AP

formatting link
GL2422 (ACX100) info:
formatting link
version 2.6 ?????

version 2.8 switched to ADMtek ADM8628 chips and RF2958 radio.

The FCC ID Type certification test results will have accurate performance data. I don't have FCC ID numbers for version 2.6 or 2.8.

Reply to
Jeff Liebermann Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.