Just purchased one of these and it turns out that the software that resides in the flash is corrupted.
Does anyone know where I can get the flash program and the .ROM file to reflash the software?
There is nothing on 2wire.com site.
Cheers
Just purchased one of these and it turns out that the software that resides in the flash is corrupted.
Does anyone know where I can get the flash program and the .ROM file to reflash the software?
There is nothing on 2wire.com site.
Cheers
The message that I am getting is :
The installed version of Intelligent Gateway 1800 software is no longer functioning properly. This can result from a failed software upgrade or other memory corruption. Please contact technical support for assistance
The message your getting is from the homeportal monitor which lies(alot) it was probably blocked by a firewall and does not see the homeportal
the only time you need to flash the firmware is if the lights on the front are as below
Power = RED Broadband = Red LAN = Green
if these conditions dont apply its not a firmware issue its probably a
3rd party conflict Call 2wire tech support or the person who sold you the home portal they will be able to help you fix itIn message , Aosmosis writes
Any use?
yup thats the same sequence that I have.
How the hell can i flash the firmware, without sending it to the US.
BT have said that they dont want anything to do with it.
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.