Could some VOIP guru please help me ? I am trying to set up the following :
Analog ATA ATA Analog Phone Phone
A lot of the ATAs come with both LAN and WAN connections. How do I connect the two ATAs so that I can achieve the following -- if I dial a number on the first analog phone, the analog phone on the other ATA would ring. I have been told that this could be achieved with a 'Hotline' but I am not sure.
Any hints, suggestions would be greatly appreciated. Thanks in advance for your help.
Get an ATA with two line capability, most ATA's will let each line call the other, or of course via some VoIP provider. You can use DECT phones if you don't want phone wires.
Also you could just use VoIP softphone (Xten lite) on one, or both ends - no need for ATA or phones at all. Regards, Martin
It is a normal function on ATA. please try to find the peer to peer setting on those ATAs. no need the hotline service.
Luis
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.