Hi,
Does anyone know how to default a Cisco IP conference station (CP-7936) . I have 2 that are stuck in a loop looking for a particular TFTP server. it won't boot to any of the menus to allow me to change the config.
Rgds
Phil
Cisco IP Conference Station - Factory Reset
Aug 14, 2007
1 Replies
Phil,
Do you have them configured with Static IP addresses? Usually TFTP server is configured through DHCP (Option 150). Make sure you connect 7936 to correct subnet.
As an alternative, I can offer you to put a PC with TFTP server (for example, freeware), where you put required files. Configure PC with IP address the phones are looking for, and you should be able to get out of the loop.
Good luck,
Mike CCNP, CCDP, CCSP, Cisco Voice, MCSE W2K, MCSE+I, Security+, etc. CCIE R&S (in progress), CCIE Voice (in progress)
------ Headset Adapters for Cisco IP Phones
formatting link
formatting link
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required