9 discussions on Cabling-Design.com Forums about the Smarthome 2000STW: what owners asked, what went wrong, and what fixed it.
I'm impressed with the concept and, so far, with the execution but am stillleery because SmartHome has such a poor track record. I also do not haveproblems with X-10 but do understand that others would probably prefersomething that is more...
While working on the XTB-II AGC loop, I discovered it can be difficult todeal with nose generated by compact fluorescent bulbs. A photo of CF noisein the X10 passband can be found at: crossings are at dead center of the trace, and 8.3mS on...
Looking at 80 lights/outlets being controlled, including a large detached garage. Looking for lighting control preferably with an integrated controller- UPB - Supported by Elk and HAI- Insteon - Single vendor, partially supported by...
I have one of those new "wheelless" Smarthome appliance modules. It looses the housecode and/or unit code about once per week. Is this a common problem? Anyone else have this problem?
Good Morning All, I seem to be having an issue with a couple of Smarthome PowerLincs.My tw523's all work fine as does my XTB and CM11. Over the last coupleof weeks I seem to be getting a lot of failures on the X10 portion ofmy system. ...
Using a CM11A to monitor dims (brights) on the power line, I noticethat most X10 transmitters, e.g., CM11A, Mini/Maxi-controllers,RR501, send dims (brights) according to the formula: dims = 11*N + Xwhere N >= 0 and X varies randomly -...