8 discussions on Cabling-Design.com Forums about the Linksys SRW2016: what owners asked, what went wrong, and what fixed it.
I manage a small network (75 desktops, 4 servers) with a single HPProcurve 4000m switch which has one 1-port gigabit module and the other7 modules having ten 10/100 ports. I've got two HP Proliant DL serverswith dual gigabit NICS. ...
Hi,We have a Linksys managed 16 port switch with VLAN capability. There are unmanaged switches connected to each port of this Linksys switch. The domain controller (DHCP+DNS) is connected to port 16.A separate internet feed (on the same...
Hi,A time ago Marco in this ng suggested me to use the Linksys SRW2016 PVE feature to be able to enable/disable internet access in selected classrooms in a school. The Linksys manual did not correspond with the actual web interface for the...
I'm having many difficulties setting up VLANs with Linksys SRW2016.Specifically trunk a port doesn't operate as expected - notransferring data from other VLANs.Unfortunately the documentation does not include tutorials / concepts /examples...
Hi,We have a school scenario with two servers with dual port network cards.Hence there are four CAT6 wires from the servers to the classroom networkdistribution closet.We have 11 classrooms where we plan 100MBit/s switches with gigabit...
Does anybody have any experience of these switches (or any otherLinksys gigabit)? They have a good spec at a very low price. This maybe either good or bad..ThanksJohn