Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

Simple Netflow question

As a best practice, do most of you who use Netflow enable it on all interfaces of a router, or just collect statistics...
2 comments posted 20yrs
posted by bobh1234
2 comments posted 20yrs posted by bobh1234

mapping IPs

I have a number of nodes on a lan served by a 2900 switch and 2600 router. Most of these nodes have both routable and n...
16 comments posted 20yrs
posted by tom
16 comments posted 20yrs posted by tom

VOIP problem in Cisco 1751V

Hi friends, I just wanted to let you know that I am seeing a bizarre problem in Cisco 1751V with IOS 12.3(10). The two...
1 comments posted 20yrs
posted by gautamzone
1 comments posted 20yrs posted by gautamzone

two cisco dte connections

I have for the hobby two cisco 805 routers. The problem is that I only Have got two dte v.35 cable's. To buy a dce v.35...
4 comments posted 20yrs
posted by m_kos
4 comments posted 20yrs posted by m_kos

RE: Flow control to through Switch

I'm trying to clarify flow control through switches: achieved by - flow control achieved through the NIC driver - flow...
0 comments posted 20yrs
posted by jdwood37
0 comments posted 20yrs posted by jdwood37

PIX versioning scheme

Hi, i don't get the PIX software versioning scheme... there is a 7.0.4 ED (which i've currently installed), then some i...
1 comments posted 20yrs
posted by adrock0501
1 comments posted 20yrs posted by adrock0501

Equal cost paths from separate OSPF Processes

I came across a quirk in 12.0(23) where OSPF will permit the installation of equal cost routes (default in this case) f...
0 comments posted 20yrs
posted by mosfet
0 comments posted 20yrs posted by mosfet

dynamic?

Small question, IF I do this: . static (inside,outside) tcp interface 6258 192.168.110.2 6258 netmask 255.255.255.255 s...
0 comments posted 20yrs
posted by Server_ROOT
0 comments posted 20yrs posted by Server_ROOT

Routers/back to back/V.35/Bandwidth

Hi, I would like have some advice regarding connecting 2 routers back to back using V.35 interface. How much bandwidth...
5 comments posted 20yrs
posted by bbaruah2003
5 comments posted 20yrs posted by bbaruah2003

Catalyst 2931-XL login access

Using the console I was able to set the IP to a non-routable and when accessing using the web interface it requests aut...
1 comments posted 20yrs
posted by tom
1 comments posted 20yrs posted by tom

OSPF

What is the best way to change the Area ID for OSPF. The Area comprises of two layer 3 switches a couple of vlans with...
0 comments posted 20yrs
posted by athaided
0 comments posted 20yrs posted by athaided

ospf

hi consider the scenario Two layer 3 switches that have two Vlans configured. OSPF is the routing protocol. The switche...
0 comments posted 20yrs
posted by athaided
0 comments posted 20yrs posted by athaided