Cisco Systems

ASA 5505- get rid of class-map

I have an ASA 5505 and I want to get rid of these part of commands, class-map inspection_default match default-inspecti...

2 comments posted 16yrs

posted by Rob

2 comments posted 16yrs posted by Rob

IP SLA issue

Hi, Just would like to know the IP SLA value for my network. We set up a MPLS network with 10 locations, among them, 5...

0 comments posted 16yrs

posted by bensonlei

0 comments posted 16yrs posted by bensonlei

ASA 5505 Image problem

Hi there, I ran erase disk0 by mistake and then rebooted the device, so I received this message and it kept rebooting N...

6 comments posted 16yrs

posted by Rob

6 comments posted 16yrs posted by Rob

ASA5505

Hi all I want to get a ASA5505 Is it possible to monitor it with mrtg and nagios Many thanks

1 comments posted 16yrs

posted by np121

1 comments posted 16yrs posted by np121

Interface status monitoring

Is there any option on a cisco switch to have an interface replicate the status of another interface? Ie. if port fa0/2...

3 comments posted 16yrs

posted by die.spam

3 comments posted 16yrs posted by die.spam

Conceptual question: Reasoning behind private subnetting scheme?

We have a geographically dispersed WAN. All of the offices have 192.168.n.0/24 local IP address. The point-to-point lin...

3 comments posted 16yrs

posted by john.heitmuller

3 comments posted 16yrs posted by john.heitmuller

ap group vlan

Hello everyone, I'm trying to assign a separate interface (VLAN) to the same SSID on different APs. For this I have def...

1 comments posted 16yrs

posted by dan.cassol

1 comments posted 16yrs posted by dan.cassol

Cisco 1-Port 10 Gigabit Ethernet LAN/WAN-PHY Shared Port Adapter

Good evening I would want to ask with regard to module 10 Gigabit Ethernet and configure in WAN from cisco it appears t...

3 comments posted 16yrs

posted by mana

3 comments posted 16yrs posted by mana

Cisco Router and PPPoE Server in a Wisp Enveroniment

Hello I would like to ask you an opinion: I would like to put up a WISP and using a Cisco 2600xm as PPPoE Concentrator....

2 comments posted 16yrs

posted by adminNOSPAM

2 comments posted 16yrs posted by adminNOSPAM

Limksys WRT110

Will subject router run with Windows 7 operating system? Thank you, Seamus J. Wilson

1 comments posted 16yrs

posted by sligo

1 comments posted 16yrs posted by sligo

Question on mmc_queuecell error

I've got an 8510 that's showing this error in the log: Mar 5 09:33:28.736: %AAL5-3-INTERNAL_ERROR: aal5send: mmc_queuec...

0 comments posted 16yrs

posted by pfisterfarm

0 comments posted 16yrs posted by pfisterfarm

DSPFARM on 1760 CCME 4.3 router

I have a 1760 router setup with CME 4.3 and has two dsp's installed in the router. I have all my voip and analog phone...

0 comments posted 16yrs

posted by dirtydirk

0 comments posted 16yrs posted by dirtydirk

Very small business router

Can someone recommend a small router that can support at least three L3 VLAN's and a single WAN port? We are looking at...

7 comments posted 16yrs

posted by tdenham735

7 comments posted 16yrs posted by tdenham735

overlapping IP networks in VLAN

In a Cisco 877 (IOS 12.4(15)T11) there are two Vlan interfaces: Vlan1 (default vlan) with ip address 172.26.1.1 mask 25...

5 comments posted 16yrs

posted by nomail

5 comments posted 16yrs posted by nomail

7921G - cannot pickup call

Good afternoon, we are running a couple of Cisco 7921G wireless phones on 802.11a, connected to a Cisco Wireless LAN co...

0 comments posted 16yrs

posted by thomas.zilz

0 comments posted 16yrs posted by thomas.zilz