Which command displays the EIGRP cost to a specific destination
Which command displays the EIGRP cost to a specific destination
Sep 06, 2006
1 Replies
EIGRP uses a composiste metric. It does not use cost per link as in OSPF.
sh ip eigrp topo 1.1.1.1 255.255.255.255
IP-EIGRP (AS 99): Topology entry for 1.1.1.1/32 State is Passive, Query origin flag is 1, 1 Successor(s), FD is
128256 Routing Descriptor Blocks: 0.0.0.0 (Loopback99), from Connected, Send flag is 0x0 Composite metric is (128256/0), Route is Internal Vector metric: Minimum bandwidth is 10000000 Kbit Total delay is 5000 microseconds Reliability is 255/255 Load is 1/255 Minimum MTU is 1514 Hop count is 0Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required