UK - PIPEX - VP/VC values.

Hi Alex!

I'm using Pipex and this config works for me... Obviously there are more parameters for the interfaces but not relevant to your question like ip address assignment on the dialer interface

---------------------------------------------------------------- interface ATM0 no ip address no atm ilmi-keepalive atm vc-per-vp 64 dsl operating-mode auto pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1

interface Dialer 1 encapsulation ppp dialer pool 1 dialer-group 1 ppp authentication chap pap callin ppp chap hostname (isp_username) ppp chap password (isp_password) ppp pap sent-username (isp_username) password



Reply to
Loading thread data ...

Has anyone this provider for his/her ADSL connection?

Could you post the ATM config parameters for the router to work properly?

Thanks, Alex.

Reply to
AM Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.