Testing Cisco PIX 520 with six interfaces.

Hi Folks, I have the above-mentioned equipment in my home lab that I would like to configure such that apart from the inside network and outside interface, I would also like if possible to make sure that all the quad nic interfaces(DMZs) are in good health and can pass traffic if placed in production environment. I do not want to pay for static IPs that can assigned to me by my ISP in other to do Inside dynamic NAT or even inside dynamic PAT or static NAT. What are my choices to test this Cisco PIX 520 at home? Anyway, the PIX is running 6.35 and PDM v3.04 Any suggestions will be greatly appreciated.

Thanks, Benchmark..

Reply to
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.