1. Home
  2. Cisco Systems
  3. Standard PoE on Catalyst 3500 XL series (with inline power)

Standard PoE on Catalyst 3500 XL series (with inline power)

Ok, so i have a few 24 Port catalyst 3500 XL series with Inline Power... Does anyone know how to enable normal PoE on the device, so i can use it with non-cisco hardware.. i don't require the inline features for PoE for the hardware i am trying to power up...

Cheers in advance, Dave N.

Reply to
Neddy
Loading thread data ...

conf t int f0/X inline power always

Reply to
Brian V

Ok, i do not have any 'always' option for inline power... I have the following:

Office-Testing-3500(config-i)#power inline ? auto Automatically detect and power inline devices never Never apply inline power

Is there any other way to always enable PoE on a specific port on the catalyst 3500?

Cheers,

Reply to
Neddy

This switch only supports the Cisco proprietary PoE standard, not the IEEE

802.11af PoE standard.
Reply to
Thrill5

So only cisco IP phones & ap's will work from it?

Reply to
Neddy

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.