I'm copying line-by-line the configuration from my 6.3.4 515E to a new 515E with v7.01 and this way learning the changes. But I'm stuck on this line from 6.3.4. and I can't seem to find the equivalent on 7.01
crypto map mymap client configuration address initiate Error: Invalid input detected at "configuration")
Later.... I see now Cisco says this command is not supported in v7.01.
Why?
If you know I thank you in advance for the answer!
-Bob
Cisco's changed the IPSec process radically in v7 of the PIX/ASA. You'll want to read the section on group policies and tunnel groups in the documentation. It's much more feature-rich than 6.x, but much more command-intensive.
One thing I definitely don't like in 7.x is that the show command structure changed--you can no longer do something like show nameif to see the nameif commands, you have to use a much more cludgier method to do this, which is a pain.
Cheers! Richard
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.