Pix 501 VPN IPsec Configuration

My goal is to allow outside users to establish vpn connection using cisco vpn client vs. 4.*. I used pdm to make this configuration. It doesn't work. Below is my configuration. Can somedody tell me what I am doing wrong here?

Thanks in advance

: Saved : PIX Version 6.3(5) interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password 8Ry2YjIyt7RRXU24 encrypted passwd 2KFQnbNIdI.2KYOU encrypted hostname pixfirewall domain-name ciscopix.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names access-list allow_inbound permit tcp any interface outside eq 3389 access-list inside_outbound_nat0_acl permit ip any access-list outside_cryptomap_dyn_20 permit ip any pager lines 24 mtu outside 1500 mtu inside 1500 ip address outside pppoe setroute ip address inside ip audit info action alarm ip audit attack action alarm ip local pool localp pdm location inside pdm location outside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_outbound_nat0_acl nat (inside) 1 0 0 static (inside,outside) tcp interface 3389 3389 netmask 0 0 access-group allow_inbound in interface outside timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout sip-disconnect 0:02:00 sip-invite 0:03:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server LOCAL protocol local http server enable http inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec sysopt connection permit-pptp sysopt connection permit-l2tp crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside isakmp enable outside isakmp policy 20 authentication pre-share isakmp policy 20 encryption 3des isakmp policy 20 hash md5 isakmp policy 20 group 2 isakmp policy 20 lifetime 86400 telnet inside telnet timeout 5 ssh timeout 5 console timeout 0 vpdn group pppoe_group request dialout pppoe vpdn group pppoe_group localname vze26sqi vpdn group pppoe_group ppp authentication pap vpdn username vze26sqi password ********* vpdn username rg1234 password ********* dhcpd address inside dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside username rgelfand password rEj0/aHHZOdaRWQn encrypted privilege 15 terminal width 80 Cryptochecksum:af9539f99fc7bf9d0d622fd44581a8ab : end [OK]
Reply to
Loading thread data ...

k... I went to this site

formatting link
had everything I needed.

Sorry for the bother.

Reply to

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.