PIX 501 - Can not access local resources

I set up a PIX 501 at home and configured VPN access. I can connect without issue, but can't access any local resources by IP.

Config attached below;

PIX501# show run : Saved : PIX Version 6.3(5) interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password blahblahblah encrypted passwd blahblahblah encrypted hostname PIX501 domain-name mycompany.local fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0

172.16.10.0 255.255.255.240 access-list home_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any pager lines 24 mtu outside 1500 mtu inside 1500 ip address outside pppoe setroute ip address inside 192.168.1.1 255.255.255.0 ip verify reverse-path interface outside ip audit name outside attack action alarm ip audit interface outside outside ip audit info action alarm ip audit attack action alarm ip local pool vpnscope 172.16.10.1-172.16.10.10 pdm location 10.200.200.0 255.255.255.240 outside pdm location 10.200.200.0 255.255.255.224 outside pdm location 172.16.10.0 255.255.255.224 outside pdm location 192.168.1.64 255.255.255.192 outside pdm location 172.16.10.0 255.255.255.240 outside pdm location 192.168.222.0 255.255.255.248 outside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 10 interface nat (inside) 0 access-list inside_outbound_nat0_acl nat (inside) 10 0.0.0.0 0.0.0.0 0 0 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout sip-disconnect 0:02:00 sip-invite 0:03:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server LOCAL protocol local http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec sysopt connection permit-pptp sysopt connection permit-l2tp crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map client authentication LOCAL crypto map outside_map interface outside isakmp enable outside isakmp nat-traversal 20 isakmp policy 20 authentication rsa-sig isakmp policy 20 encryption des isakmp policy 20 hash sha isakmp policy 20 group 1 isakmp policy 20 lifetime 86400 isakmp policy 40 authentication pre-share isakmp policy 40 encryption 3des isakmp policy 40 hash md5 isakmp policy 40 group 2 isakmp policy 40 lifetime 86400 vpngroup home address-pool vpnscope vpngroup home split-tunnel home_splitTunnelAcl vpngroup home idle-time 1800 vpngroup home password ******** telnet 192.168.1.0 255.255.255.0 inside telnet timeout 5 ssh 192.168.1.0 255.255.255.0 inside ssh timeout 5 management-access inside console timeout 0 vpdn group pppoe_group request dialout pppoe vpdn group pppoe_group localname snipped-for-privacy@myisp.net vpdn group pppoe_group ppp authentication pap vpdn username snipped-for-privacy@myisp.net password ********* dhcpd address 192.168.1.101-192.168.1.132 inside dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside dhcpd enable inside username myuser password mypass encrypted privilege 15 terminal width 80 banner motd All access is logged, unauthorized users will be prosecuted to the furthest extent allowable by law. : end
Reply to
Jamie
Loading thread data ...

Would a default route from the inside router help resolve the issue? ;-) oops

Reply to
Jamie

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.