OPEN PORT PIX
Jul 28, 2005
4 Replies
First you'll need to do some clarification. Port 1000, but what protocol? Then your configuration indicates that you are using NAT, so will this connection use NAT or not?
the protocol is TCP, and the connection use NAT.
Thank you. it already works well
access-list acl_inbound permit tcp any host xxx.xxx.xxx.xxx eq 1000 access-group acl_inbound in interface outside static (inside,outside) xxx.xxx.xxx.xxx 10.254.254.222 netmask
255.255.255.255where xxx.xxx.xxx.xxx is your outside PIX address
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required