1. Home
  2. Cisco Systems
  3. NAT with Multiple Internet 3600

NAT with Multiple Internet 3600

Hi,

I have an interesting setup.

I have a 3620 with 2 NM-2E2W and 1 WIC-1DSU-T1. Ethernet 0/0 is connected to VLAN2 on the switch with a /27 from the T1 Ethernet 0/1 is NC Ethernet 1/0 is connected to a cable modem Ethernet 1/1 is connected to VLAN1 on the switch and is NAT with

192.168.0.0/24 Serial 0/0 is connected to T1 line

My router is running 12.3(10e) IP/FW/IDS PLUS IPSEC 3DES

What I need to do is have both internet connections connected to the same NAT pool with the T1 line handling outgoing traffic on ports 1200,

27000-27015, 27020-27039 and the cable modem handling the rest

Thanks in advance

Aaron

Reply to
valeres
Loading thread data ...

Policy Based Routing (PBR).

Reply to
Bod43

Thanks, thats exactly what i was looking for.

Aaron

Reply to
valeres

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.