How to Identify unique calls in voip log file..

Hi all, I am trying to parse the Q931 logs. I want to identify the unique calls in them For example, see the following snapshot from one of the logs...

Jul 6 14:34:32 dcaas5450.1.bw.dca.vantageip.net 133806164: Jul 6

14:34:32.324: ISDN Se7/5:23 Q931: TX -> SETUP pd = 8 callref = 0x1F0F Jul 6 14:34:32 dcaas5450.1.bw.dca.vantageip.net 133806165: Bearer Capability i = 0x8090A2 Jul 6 14:34:32 dcaas5450.1.bw.dca.vantageip.net 133806166: Standard = CCITT Jul 6 14:34:32 dcaas5450.1.bw.dca.vantageip.net 133806167: Transfer Capability = Speech Jul 6 14:34:32 dcaas5450.1.bw.dca.vantageip.net 133806168: Transfer Mode = Circuit Jul 6 14:34:32 dcaas5450.1.bw.dca.vantageip.net 133806169: Transfer Rate = 64 kbit/s Jul 6 14:34:32 dcaas5450.1.bw.dca.vantageip.net 133806170: Channel ID i = 0xA98384

Jul 6 14:34:50 dcaas5450.1.bw.dca.vantageip.net 133806903: Jul 6

14:34:50.856: ISDN Se7/2:23 Q931: RX RELEASE_COMP pd = 8 callref = 0x9F0F

Jul 6 14:38:22 dcaas5450.1.bw.dca.vantageip.net 133821523: Jul 6

14:38:22.093: ISDN Se7/2:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x9F0F

First I assumed that we can use the combination of PRI and callref value to be unique. But in this case One TX call is overlapping with one RX call having same callref (0x1F0F) and same PRI value (Se7/5:23).... Now what to do in this case..?

thanks Yogesh

Reply to
yogi
Loading thread data ...

ISDN Se7/5:23 Q931: RX callref = 0x1F0F

Capability i = 0x9090A2

Transfer Capability = 3.1kHz Audio

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Preferred, Channel 1

0x9F8B0100A10F020

do a show voice call summ

Reply to
gcave

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.