Getting message: IKE_MAIN:507

I've been using the Cisco VPN client for years on XP. I recently move to a new laptop with Vista Home Premium and installed the latest client (0600 level).

I connect but have no tunnel addresses in the status. My log shows several errors (see log below).

I am running ZoneAlarm Security Suite and I do not see any alerts. The VPN client programs are all trusted.

Any suggestions?

----------------- log -----------------------

Cisco Systems VPN Client Version 5.0.01.0600 Copyright (C) 1998-2007 Cisco Systems, Inc. All Rights Reserved. Client Type(s): Windows, WinNT Running on: 6.0.6001 Service Pack 1 Config file directory: C:\\Program Files\\Cisco Systems\\VPN Client\\

1 19:24:06.893 06/12/08 Sev=Warning/2 IKE/0xA3000067 Received an IPC message during invalid state (IKE_MAIN:507)

2 19:24:27.204 06/12/08 Sev=Warning/2 CVPND/0xA3400015 Error with call to IpHlpApi.DLL: unable CreateUnicastIpAddressEntry, error 0

3 19:24:42.243 06/12/08 Sev=Warning/2 CVPND/0xA340000E Failed to get adapter index.

4 19:24:42.243 06/12/08 Sev=Warning/2 CM/0xA3100024 Unable to add route. Network: 0, Netmask: 0, Interface: ac1a837b, Gateway: ac1a8001.

5 19:24:46.845 06/12/08 Sev=Warning/3 CVPND/0xA340001A Failed to find VA MAC Address

6 19:24:46.845 06/12/08 Sev=Warning/2 CM/0xE3100008 Failed to register private (virtual adapter) interface

7 19:24:48.966 06/12/08 Sev=Warning/2 IKE/0xE300009B Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)

8 19:24:48.982 06/12/08 Sev=Warning/2 IKE/0xE30000A7 Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2238)

9 19:25:17.826 06/12/08 Sev=Warning/2 CVPND/0xA3400015 Error with call to IpHlpApi.DLL: unable CreateUnicastIpAddressEntry, error 0

10 19:25:32.833 06/12/08 Sev=Warning/2 CVPND/0xE3400013 AddRoute failed to add a route: code 5010 Destination 0.0.0.0 Netmask 0.0.0.0 Gateway x.y.0.1 Interface x.y.z.44

11 19:25:32.833 06/12/08 Sev=Warning/2 CM/0xA3100024 Unable to add route. Network: 0, Netmask: 0, Interface: ac1a052c, Gateway: ac1a0001.

---------- Lionel B. Dyck < Homepage:

formatting link

Reply to
Lionel B. Dyck
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.