1. Home
  2. Cisco Systems
  3. Error connecting using CISCO VPN Client 4.0.4(D)

Error connecting using CISCO VPN Client 4.0.4(D)

Hi,

When i try to connect using the VPN Client 4.0.4(D) the following error message shows up. Any ideas???

Cisco Systems VPN Client Version 4.0.4 (D) Copyright (C) 1998-2003 Cisco Systems, Inc. All Rights Reserved. Client Type(s): Windows, WinNT Running on: 5.1.2600 Service Pack 2

1 16:13:22.644 07/08/05 Sev=Warning/2 CVPND/0xE3400003 Function RegOpenKey failed with an error code of 0x00000002(WindowsVirtualAdapter:557)

2 16:13:22.644 07/08/05 Sev=Warning/3 CVPND/0xE340000C The Client was unable to enable the Virtual Adapter because it could not open the device.

3 16:13:22.644 07/08/05 Sev=Warning/2 IKE/0xE3000099 Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:938)

4 16:13:22.644 07/08/05 Sev=Warning/2 IKE/0xE30000A5 Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2202)

Warm regards, Pavan

Reply to
Pavan Kishore K. S.
Loading thread data ...

I have the windows XP filewall on and provided exceptions to the ipsecdailer.exe and opened the following ports too

500 10000 62512 - 24

but still the problem persists.

Reply to
Pavan Kishore K. S.

I diable the windows firewall and still the problem persists.

When i connect, the status bar changes as follows: 'Authenticating user' -> 'Contacting the security gateway...' ->

'Negotiating Security Policies' -> 'Securing communications channel' ->

'Not connected'.

Dont know what hapens suddenly.. Other laptops in our company work perfectly fine. I am using a Dell D610 with wi-fi connectivity. I disabled the wireless connectivity but still the problem persists.

Donno what next to try. any suggestions?

Reply to
Pavan Kishore K. S.

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.