e3 line flapping

can we get the show controller t3 and show interface when this happens? the controller goes down first and points to a layer 1 issue.

Reply to
Anthrax
Loading thread data ...

Hello,

i have a PA-MC-E3 module in a 7206 which is flapping. clock source was checked, line was checked with the local telco, module was replaced with a new one. I'm starting to run out of ideas. Can anyone help what may cause this?

000416: Aug 18 21:02:13.568 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000417: Aug 18 21:02:14.572 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000418: Aug 18 21:46:44.007 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000419: Aug 18 21:46:45.011 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000420: Aug 18 21:46:57.027 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000421: Aug 18 21:46:58.031 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000422: Aug 18 21:49:11.160 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000423: Aug 18 21:49:12.164 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000424: Aug 18 23:50:21.996 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000425: Aug 18 23:50:23.000 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000426: Aug 18 23:57:25.407 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000427: Aug 18 23:57:26.411 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000428: Aug 19 00:03:53.786 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000429: Aug 19 00:03:54.790 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000430: Aug 19 01:27:18.502 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000431: Aug 19 01:27:19.506 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000432: Aug 19 02:08:21.011 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000433: Aug 19 02:08:22.023 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000434: Aug 19 05:33:13.072 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000435: Aug 19 05:33:14.076 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000436: Aug 19 07:21:39.291 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000437: Aug 19 07:21:40.295 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000438: Aug 19 15:11:21.797 SCET: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 222: Neighbor 1.1.2.89 (Multilink62) is down: holdin g time expired 000439: Aug 19 15:12:17.506 SCET: %LINK-3-UPDOWN: Interface Multilink62, changed state to down 000440: Aug 19 15:12:18.502 SCET: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0/12:3, changed state to down 000441: Aug 19 15:12:18.506 SCET: %LINEPROTO-5-UPDOWN: Line protocol on Interface Multilink62, changed state to down 000442: Aug 19 15:12:23.870 SCET: %LINK-3-UPDOWN: Interface Multilink62, changed state to up 000443: Aug 19 15:12:24.866 SCET: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0/12:3, changed state to up 000444: Aug 19 15:12:24.870 SCET: %LINEPROTO-5-UPDOWN: Line protocol on Interface Multilink62, changed state to up 000445: Aug 19 15:12:26.454 SCET: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 222: Neighbor 1.1.2.89 (Multilink62) is up: new adja cency 000446: Aug 19 15:14:37.567 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000447: Aug 19 15:14:38.579 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000448: Aug 19 15:46:41.396 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000449: Aug 19 15:46:41.420 SCET: %VPN_HW-4-PACKET_ERROR: slot: 1 Packet Encryption/Decryption error, Output Authenticat ion error:srcadr=1.1.1.153,dstadr=1.1.1.158,size=1496,handle=0x6385 000450: Aug 19 15:46:42.400 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000451: Aug 19 15:46:49.408 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000452: Aug 19 15:46:50.412 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000453: Aug 19 20:31:31.441 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000454: Aug 19 20:31:32.445 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000455: Aug 19 20:32:08.486 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000456: Aug 19 20:32:09.498 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000457: Aug 19 21:59:27.580 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000458: Aug 19 21:59:28.584 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000459: Aug 19 22:57:33.810 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000460: Aug 19 22:57:34.814 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up 000461: Aug 20 07:37:28.646 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to down 000462: Aug 20 07:37:29.651 SCET: %CONTROLLER-5-UPDOWN: Controller E3 2/0, changed state to up

udv Adam

formatting link
A: No. Q: Should I include quotations after my reply?

Reply to
Adam KOSA

------->

Reply to
Anthrax

On Tue, 23 Aug 2005, it was written:

unfortunately no, because the flap comes and goes, within around 1 sec. i can not log in and issue show commands in time :/

our telco was investigating this problem and gave it back that it's not a layer 1 problem. and i don't have proof that says the opposite, to make them re-test.

Adam

formatting link
A: No. Q: Should I include quotations after my reply?

Reply to
Adam KOSA

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.