1. Home
  2. Cisco Systems
  3. Configuring a 760 for internet access

Configuring a 760 for internet access

Hi all,

I have a problem with the 760 ISDN router...

I have loaded the c760-in.b-NET3.43.1.bin and have configured it with Fast Step... The final check in Fast Step [sometimes] gives an error though...

Setup router => always OK Test basic connection => always OK Test internet connection => sometimes OK, but mostly with errors saying that the WAN IP addresses don't answer.

The weird thing is that I can check my email, use newsgroups, can call people through Skype, but can't browse the web... Maybe this is blocked somewhere in the configuration file?

Unfortunately I don't know enough to analyse it, but I do know how to change it with hyperterminal... So maybe someone here can help me by having a look at the log below?

Ah... I am in Poland... don't know whether that matters ;-)

Thanks,

Cesco

upload

CD

SET SCREENLENGTH 20

SET COUNTRYGROUP 1

SET LAN MODE ANY

SET WAN MODE ONLY

SET AGE OFF

SET MULTIDESTINATION OFF

SET SWITCH NET3

SET ALAWVOICE ON

SET INTERNALTONES NONE

SET 1 DELAY 30

SET 2 DELAY 30

SET BRIDGING ON

SET LEARN ON

SET PASSTHRU OFF

SET SPEED AUTO

SET PLAN NORMAL

SET 1 AUTO OFF

SET 2 AUTO ON

SET 1 NUMBER

SET 2 NUMBER

SET 1 BACKUPNUMBER

SET 2 BACKUPNUMBER

SET 1 RINGBACK

SET 2 RINGBACK

SET 1 CLIVALIDATENUMBER

SET 2 CLIVALIDATENUMBER

SET CLICALLBACK OFF

SET CLIAUTHENTICATION OFF

SET SYSTEMNAME [my isp login name]

LOG CALLS TIME VERBOSE

SET UNICASTFILTER OFF

DEMAND 1 THRESHOLD 0

DEMAND 2 THRESHOLD 0

DEMAND 1 DURATION 1

DEMAND 2 DURATION 1

DEMAND 1 SOURCE LAN

DEMAND 2 SOURCE LAN

TIMEOUT 1 THRESHOLD 0

TIMEOUT 2 THRESHOLD 0

TIMEOUT 1 DURATION 0

TIMEOUT 2 DURATION 0

TIMEOUT 1 SOURCE LAN

TIMEOUT 2 SOURCE LAN

SET AOCDTIMEOUT OFF

SET REMOTEACCESS PROTECTED

SET LOCALACCESS ON

SET LOGOUT 20

SET CALLERID OFF

SET PPP AUTHENTICATION IN CHAP PAP

SET PPP CHAPREFUSE NONE

SET PPP CHAPALLOW MULTIHOST OFF

SET PPP AUTHENTICATION OUT NONE

SET PPP AUTHENTICATION ACCEPT EITHER

SET PPP TAS CLIENT 0.0.0.0

SET PPP TAS CHAPSECRET LOCAL ON

SET PPP PASSWORD CLIENT ENCRYPTED [removed]

SET PPP SECRET CLIENT ENCRYPTED [removed]

SET PPP PASSWORD HOST ENCRYPTED [removed]

SET PPP SECRET HOST ENCRYPTED [removed]

SET PPP CALLBACK REQUEST OFF

SET PPP CALLBACK REPLY OFF

SET PPP NEGOTIATION INTEGRITY 10

SET PPP NEGOTIATION COUNT 10

SET PPP NEGOTIATION RETRY 3000

SET PPP TERMREQ COUNT 2

SET PPP MULTILINK OFF

SET PPP MULTILINK PPPHEADER ON

SET COMPRESSION STAC

SET PPP BACP ON

SET PPP ADDRESS NEGOTIATION LOCAL OFF

SET PPP IP NETMASK LOCAL OFF

SET IP PAT UDPTIMEOUT 5

SET IP PAT TCPTIMEOUT 30

SET IP RIP TIME 30

SET CALLDURATION 0

SET SNMP CONTACT ""

SET SNMP LOCATION ""

SET SNMP TRAP COLDSTART OFF

SET SNMP TRAP WARMSTART OFF

SET SNMP TRAP LINKDOWN OFF

SET SNMP TRAP LINKUP OFF

SET SNMP TRAP AUTHENTICATIONFAIL OFF

SET DHCP SERVER

SET DHCP ADDRESS 10.0.0.3 200

SET DHCP LEASETIME 1440

SET DHCP NETMASK 255.255.255.0

SET DHCP DNS PRIMARY 194.204.152.34

SET DHCP DNS SECONDARY 194.204.159.1

SET DHCP DOMAIN

SET DHCP GATEWAY PRIMARY 10.0.0.1

SET DHCP NETBIOS_SCOPE

SET CALLTIME VOICE INCOMING OFF

SET CALLTIME VOICE OUTGOING OFF

SET CALLTIME DATA INCOMING OFF

SET CALLTIME DATA OUTGOING OFF

SET USER LAN

SET IP ROUTING ON

SET IP ADDRESS 10.0.0.1

SET IP NETMASK 255.255.255.0

SET IP FRAMING ETHERNET_II

SET IP PROPAGATE ON

SET IP COST 1

SET IP RIP RECEIVE V1

SET IP RIP UPDATE OFF

SET IP RIP VERSION 1

SET IP FILTER UDP IN SOURCE 0.0.0.0/0:137-138 BLOCK

SET IP FILTER TCP IN SOURCE 0.0.0.0/0:139 BLOCK

SET IP FILTER UDP IN SOURCE 0.0.0.0/0:137-138 BLOCK

SET IP FILTER TCP IN SOURCE 0.0.0.0/0:139 BLOCK

SET IP FILTER UDP IN SOURCE 0.0.0.0/0:137-138 BLOCK

SET IP FILTER TCP IN SOURCE 0.0.0.0/0:139 BLOCK

SET IP FILTER UDP IN SOURCE 0.0.0.0/0:137-138 BLOCK

SET IP FILTER TCP IN SOURCE 0.0.0.0/0:139 BLOCK

SET IP FILTER UDP IN SOURCE 0.0.0.0/0:137-138 BLOCK

SET IP FILTER TCP IN SOURCE 0.0.0.0/0:139 BLOCK

SET IP FILTER UDP IN SOURCE 0.0.0.0/0:137-138 BLOCK

SET IP FILTER TCP IN SOURCE 0.0.0.0/0:139 BLOCK

SET USER Internal

SET IP ROUTING OFF

SET IP ADDRESS 0.0.0.0

SET IP FRAMING ETHERNET_II

SET USER Standard

SET PROFILE ID 000000000000

SET PROFILE POWERUP ACTIVATE

SET PROFILE DISCONNECT KEEP

SET IP ROUTING ON

SET IP ADDRESS 0.0.0.0

SET IP NETMASK 0.0.0.0

SET IP FRAMING NONE

SET IP RIP RECEIVE V1

SET IP RIP UPDATE OFF

SET IP RIP VERSION 1

SET IP FILTER UDP OUT DESTINATION 0.0.0.0/0:137-139 IGNORE

SET IP FILTER TCP OUT DESTINATION 0.0.0.0/0:137 IGNORE

SET USER RemoteNet

SET PROFILE ID 000000000000

SET PROFILE POWERUP ACTIVATE

SET PROFILE DISCONNECT KEEP

SET BRIDGING OFF

SET 1 NUMBER 0202130

SET 2 NUMBER 0202130

TIMEOUT 1 THRESHOLD 20

TIMEOUT 2 THRESHOLD 48

TIMEOUT 1 DURATION 360

TIMEOUT 2 DURATION 60

TIMEOUT 1 SOURCE BOTH

TIMEOUT 2 SOURCE BOTH

SET PPP ADDRESS NEGOTIATION LOCAL ON

SET IP ROUTING ON

SET IP ADDRESS 213.76.125.122

SET IP NETMASK 255.255.255.0

SET IP FRAMING NONE

SET IP PROPAGATE ON

SET IP COST 1

SET IP RIP RECEIVE V1

SET IP RIP UPDATE OFF

SET IP RIP VERSION 1

SET IP PAT ON

SET IP ROUTE DEST 0.0.0.0/0 GATEWAY 0.0.0.0 PROPAGATE ON COST 1

SET IP FILTER UDP IN SOURCE 0.0.0.0/0:137-138 BLOCK

SET IP FILTER TCP IN SOURCE 0.0.0.0/0:139 BLOCK

SET IP FILTER UDP OUT DESTINATION 0.0.0.0/0:137-139 IGNORE

SET IP FILTER TCP OUT DESTINATION 0.0.0.0/0:137 IGNORE

SET IP FILTER UDP IN SOURCE 0.0.0.0/0:137-138 BLOCK

SET IP FILTER TCP IN SOURCE 0.0.0.0/0:139 BLOCK

SET IP FILTER UDP IN SOURCE 0.0.0.0/0:137-138 BLOCK

SET IP FILTER TCP IN SOURCE 0.0.0.0/0:139 BLOCK

SET IP FILTER UDP IN SOURCE 0.0.0.0/0:137-138 BLOCK

SET IP FILTER TCP IN SOURCE 0.0.0.0/0:139 BLOCK

SET IP FILTER UDP IN SOURCE 0.0.0.0/0:137-138 BLOCK

SET IP FILTER TCP IN SOURCE 0.0.0.0/0:139 BLOCK

SET IP FILTER UDP IN SOURCE 0.0.0.0/0:137-138 BLOCK

SET IP FILTER TCP IN SOURCE 0.0.0.0/0:139 BLOCK

CD

LOGOUT

[my ISP login name]>
Reply to
Cesco van Gool
Loading thread data ...

Sounds like you may have your PC set up to use a proxy server for the web?

Does the provider support BACP and channel bonding? Looks like you are set up to dial two calls. Does the ISP support that? If not, you may get problem every time you bring up the second link.

Reply to
Phillip Remaker

As far as I know I am not using a proxy server.

I have tried to 'telnet' http pages and that does work (!?)... so how is it possible that I see the html code in telnet, but my browsers don't see it?

II am only using one data-channel, that is set up in Fast Step. It is true that the router does seem to mess up my ISDN line for the ISDN telephone... but I have not closely looked at that yet... first things first ;-)

Cesco

Reply to
Cesco van Gool

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.