Here is my config-
4510 2950sw1 2950sw2 BR340 link to remote site fa0/48 fa0/47 fa0/48 fa0/47
I want to setup the wireless link as its own VLAN (200). The default VLAN is
4, of which the majority of my switch ports all belong at the moment. I have the 2950sw1 int fa0/48 trunked to the core switch. sw1 fa0/47 and sw2 fa0/48 are both trunked and then I have the sw2 fa0/47 interface set to access VLAN
200. Is the best (correct) way to setup this scenario?