1. Home
  2. Cisco Systems
  3. debug frame replay switch

debug frame replay switch

I use a Cisco 2522 as a frame relay switch. I can ping from router A to router B thru thru the serial interface with encapsulation frame-relay, but I am not sure if those pings really go thru the FR switch or not.

I use the command debug frame-relay packet on the FR switch but there is nothing displayed when I ping from router to router.

Do I use the wrong command ( I hope so, otherwise my router settings are wrong and the packets really not go thru the FR switch ) ?

Thanks for any advice,

DT

Reply to
dt1649651
Loading thread data ...

Try 'debug frame-relay switching' - don't forget 'term mon' if you are not on the console. Here's a good link;

formatting link

Reply to
csouth

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.