1. Home
  2. Cisco Systems
  3. Cisco VPN v3.5.3 - Cannot match policy entry

Cisco VPN v3.5.3 - Cannot match policy entry

I am migrating my stuff (including cisco vpn) to a new computer, using the same LAN connection.

The IPSEC log gives me these messages on my new computer that appear to be linked to the problem:

6 11:50:13.906 12/02/05 Sev=Info/4 IKE/0x63000071 Unable to acquire local IP address after 600 attempts (over 60 seconds), probably due to network socket failure.

36 11:50:14.703 12/02/05 Sev=Warning/3 IKE/0xE3000070 Cannot match Policy Entry: local host=IP ADDR=0.0.0.0, lcl_port = 0 remote host=IP ADDR=0.0.0.0, dst_port = 0

37 11:50:14.703 12/02/05 Sev=Warning/3 IKE/0xA3000001 Failed to initiate negotiation.

38 11:50:14.703 12/02/05 Sev=Warning/3 IKE/0xE3000002 Function initialize_qm failed with an error code of

0x00000000(INITIATE:811)

Any suggestions? I've tried turning off my firewall software temporarily for no difference. I think i will try and reinstall the VNC software again.

Reply to
TheFarmer42
Loading thread data ...

Good news. Reinstall worked this time.

Details provided for those that follow me - nobody replied with their end results for other entries that mentioned my problem:

1) Remove VPN client with Windows Add/remove programs, keeping certificates etc. 2) Reinstall VPN client and off you go.

Note, > I am migrating my stuff (including cisco vpn) to a new computer, using

Reply to
TheFarmer42

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.