Cisco VPN Client and Widows 2000 server hassles

I have recently installed the Cisco VPN Client software (version

4.8.01.0300) to enable me to connect to a company VPN. My desktop machine is running Win2K Server as a domain controller, connecting directly to a D-Link Wireless router via an ethernet cable. I have configured the Cisco client software exactly as specified by the company setting up the VPN. When I connect to the VPN, I stay connected for approximately 30 - 60 seconds before the connection is terminated with a "Secure VPN Connection terminated locally by the Client. Reason 412: The remote peer is no longer responding"

I have found also that if I start a remote desktop session to a machine in behind the VPN connection, the connection is terminated even earlier than the 30-60 secs.

Now, here is the really strange part, I have also installed the Cisco VPN Client software on my aptop running Win XP SP2 connection to the same router but via the wireless link and this connections connects successfully and remains connected as long as I wish.

I am absolutely baffled and seem to have the network company administering the VPN baffled too, so would really appreciate any help on this issue. Thanks in advance

Reply to
AndyCapp77
Loading thread data ...

Hello,

Please turn on full loggin on the VPN client. They only you will be able to find out the cause of termination.

Please post the full logs of VPN client.

-Vikas

Reply to
sampark

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.