Hi, I have a big problem with configuration with cisco, when I configure routers by configuration below problem is with normal calling by PABX/Phone, Incoming call is hanged by Cisco and routed to their analog ports, outgoing calls is working properly. When I disconect Cisco from ISDN S0 everything working fine, what I'm doing wrong
CO
set systemname klodzko klodzko>set ppp secret client (prompts for chap password)
Enter Password: aa ReEnter Password: aa
klodzko>set encapsulation ppp klodzko>set ppp authentication incoming chap klodzko>set user swidnica klodzko:swidnica>set bridging on klodzko:swidnica>set timeout 120 klodzko:swidnica>set 1 number 22 klodzko:swidnica>set 2 number 22 (only when BOD) klodzko:swidnica>set ppp secret host (promts for chap password)
Enter Password: bb ReEnter Password: bb
klodzko:swidnica>set ppp authentication outgoing chap
CPE
set systemname swidnica swidnica>set ppp secret client (prompts for chap password)
Enter Password: bb ReEnter Password: bb swidnica>set encapsulation ppp swidnica>set ppp authentication incoming chap swidnica>set user klodzko swidnica:klodzko>set bridging on swidnica:klodzko>set timeout 120
swidnica:klodzko>set ppp secret host (promts for chap password)
Enter Password: aa ReEnter Password: aa
swidnica:klodzko>set ppp authentication outgoing chap
Best regards from Polland Andrzej