I am trying to setup the aironet 1200 to proform mac address authentication thru a Microsoft IAS server configured as a standard radius server. The aironet sends the mac address and the password (the mac address), Microsoft authencates it and send the reply, but the aironet never authencates it. All the doc I have read say to use the shared secert for the password but then microsoft will not authen it. What am I missing?
Thanks Ray
If I am correct, I believe the username is the mac address, witouht spaces or dots (aaaabbbbcccc) and there is no password. I used directly my Aironet 1200 as a Radius server for that matter and the usernames are configured like that :
username 004096a590a4 nopassword
I do not know how to make IAS work witout passwords... there must be a trick.
Good luck!
snipped-for-privacy@gmail.com schrieb:
The point is to use the mac address as the password.
Remember that you must authenticate the wireless acrd's MAC and not the LAN Mac!
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.