3005 VPN - error unable to add static route.

Plse assist if possible, I am getting this message on our VPN concerntrator and the user therefore can not connect anywhere:

26028 06/29/2006 09:03:19.800 SEV=4 IP/6 RPT=9 Unable to add static route to How can I resolve this? See full log below: 26016 06/29/2006 09:03:18.540 SEV=4 IKE/52 RPT=773 Group [3rdParty] User [Matador1] User (Matador1) authenticated.

26017 06/29/2006 09:03:18.670 SEV=5 IKE/184 RPT=771 Group [3rdParty] User [Matador1] Client Type: WinNT Client Application Version:

26019 06/29/2006 09:03:19.780 SEV=4 AUTH/22 RPT=1019 User [Matador1] Group [3rdParty] connected, Session Type: IPSec

26020 06/29/2006 09:03:19.780 SEV=4 IKE/119 RPT=1113 Group [3rdParty] User [Matador1] PHASE 1 COMPLETED

26021 06/29/2006 09:03:19.790 SEV=5 IKE/25 RPT=769 Group [3rdParty] User [Matador1] Received remote Proxy Host data in ID Payload: Address, Protocol 0, Port 0

26024 06/29/2006 09:03:19.790 SEV=5 IKE/34 RPT=3183 Group [3rdParty] User [Matador1] Received local IP Proxy Subnet data in ID Payload: Address, Mask, Protocol 0, Port 0

26027 06/29/2006 09:03:19.790 SEV=5 IKE/66 RPT=3166 Group [3rdParty] User [Matador1] IKE Remote Peer configured for SA: ESP-3DES-MD5

26028 06/29/2006 09:03:19.800 SEV=4 IP/6 RPT=9 Unable to add static route to

26029 06/29/2006 09:03:19.920 SEV=4 IKE/49 RPT=4336 Group [3rdParty] User [Matador1] Security negotiation complete for User (Matador1) Responder, Inbound SPI = 0x75e81b7e, Outbound SPI = 0xd54fdca5

26032 06/29/2006 09:03:19.930 SEV=4 IKE/120 RPT=4336 Group [3rdParty] User [Matador1] PHASE 2 COMPLETED (msgid=689ff330)

26033 06/29/2006 09:03:19.930 SEV=4 NAC/27 RPT=769 NAC is disabled for peer - PUB_IP:, PRV_IP:

26034 06/29/2006 09:04:21.990 SEV=5 IKE/50 RPT=1618 Group [3rdParty] User [Matador1] Connection terminated for peer Matador1. Reason: Peer Terminate Remote Proxy, Local Proxy

26037 06/29/2006 09:04:21.990 SEV=5 IKE/194 RPT=850 Group [3rdParty] User [Matador1] Sending IKE Delete With Reason message: No Reason Provided.

26039 06/29/2006 09:04:22.000 SEV=4 AUTH/28 RPT=843 User [Matador1] Group [3rdParty] disconnected: Session Type: IPSec Duration: 0:01:02 Bytes xmt: 0 Bytes rcv: 0 Reason: User Requested

26042 06/29/2006 09:04:22.000 SEV=4 IPDBG/5 RPT=9 Unable to delete static route to
Reply to
Ali Sonday
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.