Hi can I get some help please. I'm trying to test Solarwinds Engineer tools and they have a Util called Switch Port Mapper. It requires the Switch to have SNMP set up. I followed the config guide but it doesn't work
sh conf on switch shows ! snmp-server community teststring RW snmp-server enable traps tty !
and the SolarWinds tool says
"192.168.2.2 does not reply to SNMP queries using teststring."
Have I missd something?
Mark
Mark,
I believe Switchport mapper uses a RO string. I use that product at many of my customer locations and it works great.
The enable traps line is unneeded for what you are trying to use.
no snmp-server community teststring RW snmp-server community teststring RO
Another thing obviously is to make sure the solarwinds machine has connectivuty to the switch. A simple ping from the station will verify that.
-Brian
not realy, have any filters on interfaces ? or check your ip configuration.
MASH
Thanks Brian I'll try the RO setting. Connectivity is fine. There is no filtering/firewalling etc between the router and the switch.
Regards Mark
Have something to add? Share your thoughts — no account required.
Ask the community — no account required