The development trend for optical transmission equipment

Have a question or want to start a discussion? Post it! No Registration Necessary.  Now with pictures!

Optical transmission equipment with broadband access and comprehensive
service access has become the cosset in the most recent trend of
development. On the one hand, products based on the PDH technique,
which cost less than nine hundred USD, exhibit supreme inexpensiveness;
on the other, the optical transmission equipment that develops on the
basis of SDH technique, more often than not, is required by customers
to be equipped with Ethernet interface or video frequency interface.
As a typical PDH equipment, OM8E1PCM, produced by Heng Guang
Technologies, Co., Ltd in Tianjin, China has integrated eight E1
channels, one 10/100BASE-T Ethernet channel, one NX64bps, V.35 channel
and PCM30 with 30 channels. However, the exquisite equipment featured
by its 2U height and 19- inch width costs only 1000 odd USD. (For more
information about this equipment, please login .)
Sometimes, the designer may consider to realize the functions of VDF,
DDF and ODF on the PCM, so as to provide the most customized and
convenient product to clients. Such equipment is various and multiform
in configuration and modality, which includes the European 7R series
and 19-inch configuration.
At the same time, SDH equipment with E1 channel, 1000M Ethernet
interface and multi-channel 100M Ethernet interface has been more and
more popularized. The broadband interface usually will adopt automatic
and dynamic distribution manner, such as RPR technique.
Quoted text here. Click to load it
low-priced optical equipment will be developed to include the
comprehensive service access system. In addition to
10Base-T,100Base-T,1000Base-T with E1,E2,E3,T1,T2,T3 channels, 10/100
auto-adaptation Ethernet, G.703 V35 interface, V11/V24 interfaces,
video frequency, even the SCADA system is about to be able to
transmitted in one or two optical fibers.

Site Timeline