Latest threads in Ethernet LANshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
repeaters recreate signals to other segments, why not reflections?
I've heard that repeaters don't amplify a signal, but that they recreate it. Are they only used on Ethernet networks and deal only with Ethernet frames? Does recreate the signal mean they repeat the...
2
|
16 years ago
|
2 | |
|
|
Question about 802.3 clause 24 - Transimit/Transmit-Bits state diagram
Hi, I have a very specific question about 802.3 clause 24 state diagram. In Figure 24-7, Transmit Bits state diagram, looks like the state transition happens every 8ns without interruption. In Figure...
2
|
16 years ago
|
2 | |
|
|
FA: Fluke DSP-4000
http://snipr.com/FlukeDSP4000
3
|
16 years ago
|
3 | |
|
|
Network configuration problem
My 2000server (stand.edi) have two LAN card, one is for local network and another is broadband internet network, both card has static IP address, local network card ip (server ip...
—
|
16 years ago
|
— | |
|
|
Lab Technician (Wireless Technologies)- Contract/Perm position
The position is with a world class testing organization. The laboratories combine extraordinary testing facilities, highly trained technical personnel, and a defined quality process. These attributes...
—
|
16 years ago
|
— | |
|
|
Printing to remote office printers
I have a remote office that's connected to our network via a long-distance 10Mbps Ethernet. Basically the remote office has a Sonicwall firewall that's on our main network as 192.168.16.28 through the...
1
|
16 years ago
|
1 | |
|
|
Routers, switches & network speed?
We have a couple of systems with 1G network cards in our computer lab that we would like to do some testing with at their full 1G speed when talking to each other. They are sitting next to each other....
3
|
16 years ago
|
3 | |
|
|
Just asking!
what device is much better to use in connecting 3 LANS with a star topology?a switch or a hub?it is ok if i use router to connect swicthes or hubs from the 3 LAN..do u have any suggestions to make my...
1
|
16 years ago
|
1 | |
|
|
"TCP segment of a reassembled PDU" Errors
I have a networking problem on a Windows XP client talking to a Lotus Notes server over the WAN. The client's sniffer trace shows lots of messages: "TCP segment of a reassembled PDU" Can someone tell...
3
|
16 years ago
|
3 | |
|
|
How to clean up mains power?
We're having to reset our office network at least once a day. it locks up and only a power cycle will get things going again. We've replaced the router and the DSL modem. No joy. Firmware is...
59
|
16 years ago
|
59 | |
|
|
server using DG on a different Vlan.
hello networking people. Is this correct? Each Vlan must have its own Default Gateway, this directs traffic between the different vlans. Each device on a Vlan must address its own DG. I have a issue...
—
|
16 years ago
|
— | |
|
|
Packet recorder
I am looking for a packet recorder that supports Gigabit Ethernet (1000BASE-T). This recorder will be used on an IP network. The Solera Networks DS4500 with 5Gbps capture rate and 16 TB of storage is...
2
|
16 years ago
|
2 | |
|
|
Network Processing Forum
Hello, does anybody know what happened to "Network Processing Forum" website? is not available. Network Processing Forum
2
|
16 years ago
|
2 | |
|
|
Managed gigabit switch as router..?
Hi, We have two physically separated subnets, LAN1 and LAN2, each with its own domain controllers, dhcp, dns etc... Also we have a couple of servers which we would like to share between these two...
9
|
16 years ago
|
9 | |
|
|
Computer Networking!pls Help me
how can i connect 3 seperate buildings..what are the specific wires and connectors should i use?pls answer my question..it will be a big help for our project..tnx bern
9
|
16 years ago
|
9 |