Latest threads in Cisco Systemsshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
How to deny an URL instead of an IP address in ACL?
Hi NG, One of my customers router is configured as a EZVPN startpoint. To collect all local subnets to forward into that VPN an ACL is setup. I'd like to exclude a specific traffic pattern from going...
3
|
13 years ago
|
3 | |
|
|
shutdown procedure
Hello, What is the proper shutdown procedure of Cisco routers and switches when replacing a UPS that is powering them up without the risk of corrupting the IOS? Thank you, T
4
|
13 years ago
|
4 | |
|
|
Counting usage
I have an 871W router. Government has approved a scheme where the local imcumbents get to dicate rates and download limits on their competitors. This is a PPPoE service. So I want to be monitoring my...
—
|
13 years ago
|
— | |
|
|
Cisco 886VA with T-Home VDSL
Hi, I am actually running a Cisco 876 with ADSL over ISDN. Around Feb. I will get VDSL and I wonder if the Cisco 886VA supports the T-Home VDSL connection. From reading through several pages it looks...
2
|
13 years ago
|
2 | |
|
|
Cisco 2651XM high cpu usage 12.4(25b)IPBASEK9
Hello I have a problem: I have one C2651XM 48F/256D with one WIC-ADSL on a 7M/512k ADSL LINE Just a simple ACL inbound, NAT1-1 towards client and nothing else. I get at 3mbit throughput download,...
9
|
13 years ago
|
9 | |
|
|
BGP, should be simple
I'm having trouble wrapping my head around the concept of BGP weight and neighbor weight. I have two local routers, A and B both connected to a single LAN. They connect to a cloud via a 50Mb line and...
6
|
13 years ago
|
6 | |
|
|
Cisco WebVPN Acl?
I have been experimenting with the Cisco WebVPN, and it has me a bit confused. I am using reflexive access lists and whenever I make a web request over the WebVPN, the return traffic is denied. I'm...
—
|
13 years ago
|
— | |
|
|
SIP SDK 3.6
I used good one ------------------------------------- http://www.SipVoipSdk.com,
—
|
13 years ago
|
— | |
|
|
ASA 5505
I wasnt to use an ASA 5505 as my office firewall but have also to consider outgoing traffic With the AS 5505 can i filter which websites and ports the internal users are allowed to access per IP...
2
|
13 years ago
|
2 | |
|
|
searching for the NIT WARANGAL alumni
TO Akshaya ; as part of our tour at cisco we were told to ork on a project and i hav some ideas to do so so if you could give me ur email id i could mail to you
—
|
13 years ago
|
— | |
|
|
script which queries devices via SNMP and draws spanning tree for each vlan
Hi all, I was wondering whether anybody is aware of some solution which would query a device via SNMP for a list of existing VLANs and would draw a spanning tree for each of them (including other...
1
|
13 years ago
|
1 | |
|
|
cisco packet tracer firewall
Welcome I have problem: I must configure 2 networks on 1 router: 1 network is DMZ, allow any connections from outside, but only on ports 80, 23, 25, 110 it has address 10.100.128.0/255.255.192.0 deny...
1
|
13 years ago
|
1 | |
|
|
QoS and available Bandwidth
Well, I think I found something which works, thanks to a posting: class-map match-any class-voip description VOIP traffic QOS match access-group name ACLvoip ! ! policy-map voip-QoS class class-voip...
16
|
13 years ago
|
16 | |
|
|
IPv6 on Cisco 886 vs. Cisco 836
Hi, i'm haveing some problems with my brand new Cisco CPE 886. IPv6 with PPPOE doesn't work anymore. My config: interface Dialer0 description *** TeleData IPv6 *** no ip address ip flow ingress ip...
—
|
13 years ago
|
— | |
|
|
PBR on 1841 (no NAT, no ACLs, dual ADSL)
Hi, I'm having a problem trying to set up policy based routing on an 1841 with Advanced IP Services 12.4(24)T3. It's a no-NAT setup, and I've tried removing all the ACLs for test purposes, since...
8
|
13 years ago
|
8 |