WHR-HP-G54 DNS settings problem

I have several-HP-G54 units. I'm trying to use one with a Motorola Model U10C018 cable modem on Charter Communication cable internet. (system config data follows)

WHR-HP-G54 has been set up using opendns.com

DNS1(Primary) 208.67.222.222 (Manual) DNS2(Secondary) 208.67.220.220 (Manual)

Somehow the system (which part I don't know) is defaulting to the Charter DNS

DNS3 66.169.221.10 (Via DHCP) DNS4 68.113.206.10 (Via DHCP)

I've used these with Charter systems before with success but not with the U10C018 cable modem.

Contacted Buffalo support and while they have been very helpful in the past they are unable to explain what's happening or how to address the problem.

I should mention that we had to manually set the MAC Address

00:04:5A:75:D3:5B of the modem in the WHR-HP-G54 set up process otherwise the connection to the internet was flaky.

This would not be a problem but I have my grand kids using the net work and want the added protection I can get from opendns.com.

I currently have the system set up as 'open' and will lock down access once the DNS problem is fixed.

FWIW I'm in the 'toy' mode and can try most anything this group thinks might help.

TIA

Model WHR-HP-G54 Ver.1.40 (1.0.37-1.08-1.04) AirStation NameAP001601D1553E Operational ModeRouter Mode WANDHCP

Connection StatusCommunicating Operation IP Address 71.15.124.227 Subnet Mask 255.255.255.0 Default Gateway 71.15.124.1 (Via DHCP) DNS1(Primary) 208.67.222.222 (Manual) DNS2(Secondary) 208.67.220.220 (Manual) DNS3 66.169.221.10 (Via DHCP) DNS4 68.113.206.10 (Via DHCP) Host Name AP001601D1553E (Manual Setup) Domain Namesetup (Via DHCP) MTU Size1500 DHCP Server Address 68.114.37.166 Lease Acquired Time 2008/05/19 09:10:43 Lease Period 2008/05/19 11:25:00

Wired Link100Base-TX (Full-duplex) MAC Address 00:04:5A:75:D3:5B

LANIP Address 192.168.11.1 Subnet Mask 255.255.255.0 DHCP Server Enabled MAC Address 00:16:01:D1:55:3E

Wireless(802.11g) Wireless Status Enabled SSID HelloWorld-1

Encryption Mode Not Configured Wireless Channel 1 Channel (Manual)

125* High Speed ModeEnabled MAC Address00:16:01:D1:55:3F
Reply to
NotMe
Loading thread data ...

It sounds to me that you configure your router correctly, but you configured your network card to use another DNS server. Go to start then run. In the box type in cmd, and click ok. You will see a black screen come up. At the prompt, type: ipconfig /all

Copy what is displayed, and come back paste here so I can see the results.

hope it helps. Reinhard

NotMe wrote:

Reply to
Reinhard Schimek

Thanks for the response:

Finally got the DNS problem working. (btw I was unable to cut and paste from the cmd, ipconfig /all window)

Seems there was an intermittent updating of data of my dynamic IP to opendns.com's system. The cause being my computer was not on line all the time.

see

formatting link
for data on what I'm using.

While this is a solution it requires me to keep at lease one machine (in addition to the Buffalo wifi) on line and powered up.

My question now is there any way to run this application/process from the WHR-HP-G54 device itself?

Also is there any practical way to block the DHCP from accessing the DNS3 and DNS4 from my ISP? Better yet to have the DHCP system access ONLY opendns.com?

I ask as I have grand and foster kids visiting and I like the option of controlling access without having to mess with the individual computers. (that option has proven to be problematic as these kids seem to be computer savvy enough to by pass most of what we've done with regard to filtering content at the machine level)

Regards and TIA

| > WHR-HP-G54 has been set up using opendns.com | >

| > DNS1(Primary) 208.67.222.222 (Manual) | > DNS2(Secondary) 208.67.220.220 (Manual) | >

| > Somehow the system (which part I don't know) is defaulting to the Charter | > DNS | >

| > DNS3 66.169.221.10 (Via DHCP) | > DNS4 68.113.206.10 (Via DHCP) | >

| > I've used these with Charter systems before with success but not with the | > U10C018 cable modem. | >

| > Contacted Buffalo support and while they have been very helpful in the past | > they are unable to explain what's happening or how to address the problem. | >

| > I should mention that we had to manually set the MAC Address | > 00:04:5A:75:D3:5B of the modem in the | > WHR-HP-G54 set up process otherwise the connection to the internet was | > flaky. | >

| > This would not be a problem but I have my grand kids using the net work and | > want the added protection I can get from opendns.com. | >

| > I currently have the system set up as 'open' and will lock down access once | > the DNS problem is fixed. | >

| > FWIW I'm in the 'toy' mode and can try most anything this group thinks might | > help. | >

| >

| > TIA | >

Reply to
NotMe

i am glad that you have work it out... To answer you question, there are certain router's firmware that are able to contact OpenDns and other DNS service to update your information. I have the same buffalo router, I don't remember if the buffalo's router have that options. I have updated my Buffalo to a dd-wrt firmware and it has that option.You can take a look at

formatting link
If you decide to upgrade the firmware, have someone with computer skills to upgrade the router. Upgrading the firmware can cause damage to the router if improperly installed. You don't have to worry about DHCP connecting to other server if the router is properly set up.

hope it helps.

reinhard

NotMe wrote:

Reply to
Reinhard Schimek

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.