Please help - US Robotics 5461 and eMule

Can somebody please help to configure this router to work with eMule service. It fails TCP port check.

I have it running on XP Home SP2 with f/w enabled.

I set TCP port 4662 to forward to LAN Port 4662. I am not sure I did it right, though.

This is what I have:

WAN Protocol: DHCP

IP address: 192.168.251.100 Subnet mask: 255.255.255.0 Gateway: 192.168.251.1

LAN IP address: 192.168.2.1 Subnet mask: 255.255.255.0

Port forwarding:

TCP 4662 to

4662 192.168.2.2 4662 to 4662 UDP 4672 to 4672 192.168.2.2 4672 to 4672 TCP 4711 to 4711 192.168.2.2 4711 to 4711

I am not sure my Local IP address is right.. or anything is right...

Reply to
Amamba
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.