9 discussions on Cabling-Design.com Forums about the WatchGuard X1000: what owners asked, what went wrong, and what fixed it.
Hello,I have Linksys BEFSX41 VPN endpointrunning Linksys firmware 1.52.9 (which is the latest/greatest andsupposedly very reliable, and has worked well for me)that is a VPN client to aWatchguard Firebox X1000 running Fireware Pro and OS...
Hi All,I am in the process of researching router/firewall/vpn applicanes, andwanted some input from the community.I have a somewhat complex network, with am internal NAT LAN, and anexternal DMZ zone with a block of public IP addrersses...
Hi All,I am looking for Firewall for one of sites in INDIA.I am looking for following features:Firewall Throughput --- 200+/300+ MbpsConcurrent Sessions --- 500,000Nodes supported (LAN IPs) --- UnlimitedInterface 10/100 --- 4(minimum)VPN...
We are currently planning a rather substantial upgrade of our network,one aspect of which is a new firewall to manage our WAN connection.I'll briefly describe what the new network should end up looking like: - Network core will consist of...
I have three watchguard firewalls (II, X700, X1000)They all have 10+ Mobile VPN licenses and 10+ IP's in the DHCP pool,but they will only allow 2-4 VPN connections. The II allows 2, the x700allows 4, and the x1000 allows 2. Am I missing a...
This is a last ditch effort. My firewalls are off but not helping me stayconnected. I cannot replace the internal Centrino card with guaranteedcompatibility. I have a Presario X1030US with internal Wireless B Intel 2100 LAN 3B MiniPCI.....