10 discussions on Cabling-Design.com Forums about the Linksys WGA54G: what owners asked, what went wrong, and what fixed it.
I am trying to setup a wireless access point for my XBox. I have mymain wireless router (DLink 2310) hardwired to my cable modem and wantto have my second wireless router (Linksys WRT54GC) setup as an accesspoint without having to hardwire...
Ive got a wireless router that I use for broadband with my home laptop.The router is in a cupboard under the stairs and I get good receptionall over the house.When I bring my work laptop home I use the same wireless network cardso I can...
Is there not a wireless-ethernet bridge ("gaming adapter") that supports WPA-PSK (AES) ?I've bought two from a local store only to return them because they don't do AES. I told them I would keep purchasing and returning until the...
I figured out that I do not need the Linksys WGA54G to connect my PS2box to my wireless network. I ran this test with the WAP54G in clientmode and found that it will forward a DCHP/IP address from my WRK54G tomy laptop. It should do the...
Hello,Sorry if my terms are not correct but I will try to explain what I need helpon as best I can.My friend has just placed some wifi nodes on a lighting pole right done theblock from me about 10 feet with a sidd name and a ip address.I am...
I'm not sure; there's certainly nothing that says 'AP' or 'accesspoint', but there is a drop down where you can select for it to run asa router or a gateway (I've tried both, but suspect its the latteroption I need).