22 discussions on Cabling-Design.com Forums about the Linksys BEFSR11: what owners asked, what went wrong, and what fixed it.
This is my first time installing cat5 cable in my house and I am unsure how to connect to RJ45 jacks that I need to put in the wall.I've installed a WISP antenna 75 feet from the house & will be routing the outdoor cat5 cable into the...
Using a Linksys NAT router and Sygate Pro.I just did a test with Shields Up and all the tested ports came back "stealth" except for port 113, which came back closed.My impression is that having 113 closed is probably quite ok, but I wanted...
I've tried in the past but never really had solid results for vpnsetup. I have a BEFSR41 linksys router. Would like to understand thevpn setup process for windows 2000/xp pro configuration.Been reading alot on the net, obtaining bits and...
I've tried in the past but never really had solid results for vpnsetup. I have a BEFSR41 linksys router. Would like to understand thevpn setup process for windows 2000/xp pro configuration.Been reading alot on the net, obtaining bits and...
I'm looking for a device which could act as an ethernet breaker switchbased on the application or loss of power to that device. On one handwe could accomplish what we need with a low-cost switch and two cables. However, in our application...
If I am posting in the wrong group, please let me know.I have a Linksys BEFSR11 Cable/DSL Router. Up until yesterday, I wasusing a Linksys EFAH08W 8-port hub to share this connection to severalcomputers. That worked fine.I am planning to...